TAIWAN Nakazawa TNM-AX (Mounting Press Machine)
เครื่องหล่ออัดชิ้นงานละเอียด
รายละเอียดสินค้า
| Item | Product specifications | ||
|---|---|---|---|
| TNM-32AX | TNM-40AX | ||
| Type | Desktop | ||
| Shell | Fiberglass Reinforced Plastics (FRP) | ||
| Parameter | Size | Ø32mm | Ø40mm |
| Maximum Pressure | Max. 4000PSI (280kgf/cm2) | Max. 3200PSI (224kgf/cm2) | |
| Pressure control | Variable-frequency Control | ||
| Quantity | 1-2 Piece | ||
| Total power | PID Temperature Control，110-200°C Variable | ||
| Operation panel | Mode | 1. Automatic pressure compensation ( Phenolic Resin ) | |
| 2. Pressurize during cooling phase ( Acrylic Resin ) | |||
| 3. Segmented temperature and pressure compensation ( Phenolic Resin Optimization ) | |||
| 4. Pressure compensation when reaching the target temperature ( Acrylic Resin Optimization) | |||
| Function | Preheating temperature , heating time , molding temperature , cooling time molding , pressure setting , power unit switching Kgt/PSI | ||
| Temperature unit switch, temperature compensation, buzzer mode switch, sample quantity record, production module memory | |||
| Module memory Function | 1.Making pattern 2. Pressure 3. Temperature 4. Holding time 5. Cooling time | ||
| ONE TOUCH | 1. Put sample and embedded power in the tube , and choose the making pattern according to the demand. | ||
| Automatic | 2. Turn the upper cover to the position and lock it | ||
| 3. Push the START button then auto run the cycle | |||
| 4. Automatic heating, pressure compensation, cooling then complete with beep | |||
| Pre-heating function can be turned on, which can signficantly improve sample preparation efficiency | |||
| Safty | Safe temperature | When out of the safe temperature ,it’s not allowed to take samples, and the system will continue to automatically cooling down | |
| Emergency switch | Emergency button is pressed, all functions stop and display “EMG” | ||
| Overload protection | The machine has a complete overload protection mechanism | ||
| Cooling system | The cooling fan performs heat dissipation according to the panel instructions | ||
| Supply | Electricity | single phase 220V 60/50Hz | |
| Heating power | Power：1800W | ||
| Total power | 2400W | ||
| Dimension | (W) 450 x (D) 695.5 x (H) 569 mm | ||
| Weight | 82kg | 83kg | |
| Cooling water | Runing water ( Option：circulating cooling water tank ) | ||
| water inlet diameter 3/8 inch | |||
| water outlet diameter 5/8 inch | |||
| Circulating cooling water ( optional ) | electricity | single phase 220V 60/50Hz | |
| Dimension | (W) 566 x (D) 425 x (H) 477 mm | ||
| Capacity | 40L | ||
| Weight | 30kg | ||
| coolant | pure water add coolant | ||
| Standard accessories | Molding resin x 1 can(500g), spoon x 1, funnel x 1, inlet and outlet pipes 2M x 2, release agent x 1can | ||
