CCT Cabinets
These cyclic corrosion test cabinets are designed to operate to the Nissan, Honda, Toyota, Ford, Rover Group, General Motors standards incorporating Salt Spray, Humidity, Air Drying, Dry Heat and Variable Humidity Option.


Pioneered by C & W Initially for the growing demands of the automotive Industry, these cabinets are now widely used by the paint, chemical, surface coating, aerospace, offshore and defence industries throughout the world.

The cabinets are designed to operate to any one or any combinabon of the following conditions in any sequence for any pre-set time. Salt spray - All Corporate, National and International Standards.

Humidity - Constant or cyclic temperatures between ambient and 70 degrees centigrade with 98% Relative humidity. Dry heat - Dry Heat conditions typically ambient to 70 degrees centigrade.

Air drying - Hot and cold air introduction. Humidity - Cyclic temperature testing typically 42 - 48 - 42 ?C as BS 3900 F2. Dwell and ramp functions - variable humidity option 10% to 98% Rh, from ambient to 70?C.

Standards                                          
  Conforms to a wide range of Corporate and International Standards including:
   
 
  • ASTM B117
  • DIN 50.021
  • HONDA
  • NISSAN M0007 C.C.T. 1,11 & 1V
  • FORD EU B153-2
  • TOYOTA TSH 1555G
  • MASTMAASIS
  • ROVER GROUP RES 30 CT 107
  • S.W.A.A.T
  • V.W CYCLING TEST
  • UNICHEM
  • GENERAL Motors GM 9540P
Features Include 
 
MICROPROCESSOR/CONTROLLER A high specification unit for control with the capacity to hold up to 20 programs. The controller is easy to operate with rapid program selection complete with manual over-ride facility, bar-graph display, program status display and cycles completed counter. All programs are protected with security code access.
TEMPERATURE RECORDER Continuous paper type chart recorder with ON/OFF control for individual test records.
FULL VISUAL DISPLAY All events, cycles and test conditions.
KEYLOCK A tamperproof security system to prevent unauthorised program access.
CABINET HUMIDIFIER Internal heated water bath with automatic level control ensures high Relative Humidity during the relevant periods of the test cycle.
HEAVY DUTY PERISTALTIC PUMP with VARIABLE SPEED For accurate control of salt solution flow to the atomiser, indispensable for precise collection rates, also eliminates atomiser blockage.
EXTERNAL SALT SOLUTION RESERVOIR and INTEGRAL FILTER For easy cleaning and filling.
INTERNAL HEAT EXCHANGER To pre-heat the salt solution to the required temperature before introduction to the atomiser.
ACCURATE FLOWMETER Panel mounted, to monitor salt solution flow.
SOPHISTICATED LUCITE ATOMISER For baffle free mist generation ensuring precise fall-out readings throughout the chamber.
AIR REGULATOR/PRESSURE GAUGE To control and monitor the air pressure required for precise salt fog collection rates.
DRY/MOIST (humid) AIR CONTROL A simple switch-over device for required setting, depending upon specified Salt Spray Standard procedure. A compact internal air saturation unit, fully protected against overheating and low water. Automatic, self-filling system, complete with digital display of water temperature.

AUTOMATIC AIR PURGE Incorporated into test program.


Design Features                          
All C &W cabinets are manufactured from high quality materials and components are designed to give trouble free operation over long periods.
  • CHAMBER CONSTRUCTION Specially formulated fire retardent GRP giving high chemical resistance combined with excellent high temperature tolerance
             
  • APEX LID Constructed from a variety of composite materials depending on the test requirements, giving high insulation characteristics, Removable if required, robustly supported by gas springs for smooth operation and sealed with a self filling water trap integral with the chamber.
     
  • SAMPLE RACKS Standard racks are provided to accept a wide range of test panels. Racks to customers' specifications are also available.
  • COMPACT DESIGN All units are designed for maximum space utilisation. The base frame and apex roof may easily be removed tor transportation into restricted areas.
   
  • FUNCTIONAL DESIGN The clean functional design of these units ensures low maintenance and easy cleaning.
         
  • GUARANTEE AND CALIBRATION All units are fully guaranteed. Calibrated traceable to NAMAS (UKAS). Extended guarantees are available.

Hydraulic holding arm - easy to open the cover

Front view of the cover

 




Copyright 2004 By
Webmaster QualityReport.co.th